Grey unit is currently out of stock; only green units are currently available.
The Amaircare Airwash MultiPro Air Scrubber with HEAVY VOC focus features 2 kinds of prefilters and an estimated 25 lb carbon canister. It is a commercial-grade air scrubber that focuses on heavy VOCs, gases, and odors. It is a top-quality, heavy-duty portable air purifier for a wide variety of industrial applications.
800 CFM and Coverage for 41,400 ft³ (provides 1 ACH/hr). Comes with a 5-YEAR Limited Warranty on the Motor/Fan and 1 YEAR on All Other Parts Except Filters.
The Amaircare Airwash MultiPro Air Scrubber with heavy VOC focus uses 2 prefilters and an estimated 25 lb Carbon Canister for quality filtration of heavy VOCs, gases, and odors along with particulate contaminants.
This unit uses the 14" Ultra VOC kit, which contains an estimated 25 lb carbon canister for heavy adsorption.
This unit does NOT have a HEPA filter because the focus is on heavy odors, gases, and VOCs.
The Ultra canister ships separately, so your unit still arrives with the HEPA that comes in the standard unit (AKA the MultiPro HEPA). Once you install the Ultra canister in its place, that leaves you with a BONUS HEPA to use at a later time.
The Amaircare Airwash MultiPro Air Scrubber with HEAVY VOC Focus is our choice for the toughest odor jobs. It uses 2 kinds of prefilters plus the 14″ Ultra VOC canister, an estimated 25 lb carbon canister, and it does NOT have a HEPA filter (NO HEPA), because its focus is heavy VOCs, gases and odors. It still comes with a bonus HEPA to use at a later time. Amaircare made the Ultra canister for the most demanding chemical and odor work. Part of Amaircare’s AirWash line, this top-quality, heavy-duty commercial air scrubber handles a wide variety of industrial applications.
Air comes in through the media pad prefilter and the MERV 8 pleated prefilter, which catch the larger dust and debris. It then passes through a deep bed of granulated carbon pellets held in the Ultra canister’s steel mesh shell, where VOCs, chemical fumes, gases and odors are adsorbed into the carbon’s pores. The Ultra canister sits where the HEPA would go, replacing both the HEPA filter and the smaller carbon canister or blanket, so this setup carries the most carbon in the MultiPro line.
Without a HEPA, fine particles aren’t this unit’s focus. If you need particle filtration and VOC help together, look at the MultiPro HEPA & Carbon, or pair this unit with a MultiPro HEPA. Targeting one chemical in particular? The Ultra canister can be ordered with Formaldezorb, Multizorb or another special carbon.
The Ultra canister ships separately in its own box, so it isn’t damaged on the way, and your MultiPro Heavy VOC still arrives with the 14″ Perfect Seal HEPA that comes in the standard unit, the same filter our MultiPro HEPA runs on. Once the Ultra canister goes in where that HEPA sat, the HEPA is yours to keep as a bonus for later. When a job calls for dust or mold spore filtration, put the HEPA back in with the prefilters and the unit works as a MultiPro HEPA, or slide a 5 lb carbon canister inside it for the HEPA & Carbon setup.
Laser printers and marijuana dispensaries often run 2 MultiPros side by side, one with a HEPA and one with the Ultra canister, to tackle both particulates and HEAVY VOCs. The units are molded to stack (no more than 2 high while running), and many clients use the different filter configurations in series. Combining setups like this is a common way to boost purification results.
The fresh air intake and the outflow both have 12″ round collars, so you can attach ducting and draw fumes and odors from right where they start, such as a work area with paint odors or a printer room. Turn the speed up or down to suit the job, and when the red Change Filter light comes on, it’s telling you less air is making it through the filters. Before using it for fume extraction, please read the safety warnings in Amaircare’s manual, which include a dust explosion warning.
The Ultra canister’s carbon adsorbs the musty gases mold gives off (MVOCs) and helps with mycotoxins. Mold spores themselves are best caught by a HEPA, so for mold remediation our pick is the MultiPro HEPA & Carbon, which traps spores and adsorbs odors in one unit. Either way, dealing with the moisture comes before anything else. Our basement mold guide has more on that.
A rotomolded, flame-retardant polyethylene housing takes on tough settings, and the filter cabinet opens without tools and lifts out for quick changes and easy cleaning. Two molded side handles and a flexible top handle make it easy to carry, rubber feet absorb vibration, and cord wrap tabs keep the cord tidy. Its GFCI-protected accessory outlet can feed power to another unit, so several MultiPros can share one wall outlet. Amaircare builds the MultiPro in Canada and backs the motor/fan with a 5-year limited warranty, with 1 year on the other parts (filters excluded).
Every MultiPro is the same machine with different filters, so this unit can change with your needs, and your bonus HEPA gives you a head start. Just put in the filters for the focus you want:
Set up with the HEPA, the MultiPro meets HEPA standards and beyond. Amaircare tests every one of its air cleaners (air scrubbers, Chem Bio Airwash and Air Wash units) individually, and the complete system with the HEPA traps at least 99.97% of the 0.3-micron particles that enter it; that’s 0.000012 of an inch, or 1/300th the size of a human hair. At 0.1 microns, efficiency is 99.96%. This Heavy VOC setup (shown) uses one 14″ ULTRA VOC canister along with the prefilters.
One MultiPro covers up to 41,400 ft³ at a single air change per hour; with 8 ft ceilings, that’s around 5,175 sq ft. For heavy VOCs, size the space on medium speed, since slower airflow gives the carbon more contact time. The unit has to stay ahead of the source, cleaning the air faster than new odors and fumes come in, and heavy VOC or smoke areas may even call for 10 to 12 air changes an hour. That’s why many clients run more than one unit. Send us the details of your space, and we’ll help you work out the right number of units.
Note: CFM, ACH and coverage ratings are estimates from factory and/or independent testing, generally run on high in an open space similar to a lab. What you see on site can differ for a wide range of reasons, the motor and filters included. Dust building up in the filters, lower voltage at the motor, and ducts on the inlet or outlet all affect airflow, so these figures are a general guideline, not a guarantee.
Carbon life varies with usage and with how heavy the contamination is. Clean air has no smell, so odors coming from the unit are the first sign the carbon is full. Full carbon can start releasing what it adsorbed, so replace the canister when odors return. Put in a new media pad whenever the old one is caked with dust, and at least once a year; change the MERV 8 pleated prefilter behind it as needed, often with the pad or about once for every 3 pads. The More Info tab’s Filter Maintenance section walks through it step by step. Suit up with protective clothing and a mask before handling used filters.
Built around an estimated 25 lb carbon canister, the Amaircare Airwash MultiPro Air Scrubber with HEAVY VOC focus is used to solve numerous air purification needs where HEAVY VOCs, gases and odors are the concern. It’s frequently referred to as an air scrubber, air wash, Chem Airwash, heavy-duty air purifier or commercial air purifier. Some common uses are as follows:
Frequently, laser printers and marijuana dispensaries will even use 2 units together, a HEPA unit beside this one, to take on particulates and HEAVY VOCs at once. Because the units stack, many clients also run the various filter configurations in series.
Paint removal, automotive and waste removal facilities, along with smoke and fire damage cleanup, are among the other uses Amaircare suggests.
Want to talk through the MultiPro Heavy VOC? Email us at contactus@usairpurifiers.com, or call (888) 231-1463.
You’ll find 3 configurations of the Amaircare AirWash MultiPro Air Scrubber. Every machine is identical, and the filters change with the filtration needed. We list each one separately to avoid confusion.
If your usage changes over time, you can simply change your filter configuration to match your filtration needs.
Note: the CFM (cubic feet per minute), ACH (air changes per hour) and coverage ratings here are estimates, drawn from factory and/or independent testing, which is typically done on high in an open setting like a lab. Your results can differ for lots of reasons, including but not limited to the motor and the filters; filter loading, reduced motor voltage, and inlet and outlet ducting can lower airflow too. Use these ratings only as a general guideline. Amaircare may update models and specifications without notice.
Free Shipping
Amaircare MultiPro Media Pad PreFilter, 24x91-A-D0919-NA, Pack of 24
Free Shipping
Amaircare MultiPro Media Pad PreFilter, 48x91-A-D0919-NA, Pack of 48
Free Shipping
Amaircare MultiPro PreFilter, 8x91-A-D020-NA, Pleated Pre filter, Pack of 8
Free Shipping
Amaircare MultiPro Ultra Carbon VOC Canister 25 lbs, 14 in Ultra
Free Shipping
Amaircare Washable Foam 14 in Prefilter Package of 24 (91-A-1407-ET)
Free Shipping
Amaircare Airwash MultiPro HEPA Air Scrubber Optional Light VOC Protection
Free Shipping
Amaircare Airwash MultiPro HEPA Air Scrubber Moderate VOC Focus with 5 lb Carbon Canister
Free Shipping
Amaircare 4000 VOC with HEPA & Carbon Canister Airwash Air Scrubber
Free Shipping
Amaircare Airwash MultiPro BOSS Air Scrubber for Heavy VOCs with 2 Est. 30 lb Carbon Canisters
Browse Amaircare’s air scrubbers and industrial air filtration systems in the Amaircare Air Scrubber Industrial Product Catalog (PDF).
For Amaircare’s portable, whole-house and commercial HEPA air filtration systems, plus replacement filters and maintenance schedules, see the Amaircare Product Catalog (PDF). This catalog is from 2016, so some models in it are no longer made. For current models and filters, see our Amaircare air purifiers or email us at contactus@usairpurifiers.com.
All three are the same Amaircare Airwash MultiPro machine, with the same motor, housing, variable speed control and 12″ collars. What changes is the filter setup inside, matched to what you want the unit to do: HEPA for particulates, HEPA plus a 5 lb carbon canister for particulates and moderate VOCs, or an estimated 25 lb carbon canister in the HEPA’s place for heavy VOCs. Since the machine doesn’t change, you can switch setups any time by changing filters. Click a model name for its full details.
| Model | Best For | Filter Stages | Replacement Filters |
|---|---|---|---|
| Amaircare MultiPro HEPA (Optional Light VOC Protection) | Dust and fine particles from construction, remodeling and restoration, plus abatement and temporary clean rooms, with light odor help from the optional carbon blanket | 1. Media pad prefilter 2. MERV 8 pleated prefilter 3. 14″ Perfect Seal HEPA 4. Optional inner carbon blanket | Prefilters: the media pad and MERV 8 pleated prefilter, up to 12 months each, and the media pad sooner whenever it’s covered in dust HEPA: about every 2 years in commercial use Carbon blankets (pack of 12), if used: about every 6 months |
| Amaircare MultiPro HEPA & Carbon (Moderate VOC Focus) | Mold, evidence rooms, marijuana dispensaries, laser printers and odor control, when fine particles and moderate VOCs both matter | 1. Media pad prefilter 2. MERV 8 pleated prefilter 3. 14″ Perfect Seal HEPA 4. 5 lb carbon canister inside the HEPA | Prefilters: the media pad and MERV 8 pleated prefilter, up to 12 months each, and the media pad sooner whenever it’s covered in dust HEPA: about every 2 years in commercial use 5 lb carbon canister: estimated once a year, depending on contamination levels |
| Amaircare MultiPro Heavy VOC (Heavy VOC Focus) | Heavy VOCs, chemical and paint odors, fumes, marijuana dispensaries and laser printers | 1. Media pad prefilter 2. MERV 8 pleated prefilter 3. 14″ Ultra VOC canister, an estimated 25 lb carbon canister, in place of the HEPA (NO HEPA) Comes with a bonus HEPA for later use | Prefilters: the media pad and MERV 8 pleated prefilter, up to 12 months each, and the media pad sooner whenever it’s covered in dust Ultra carbon canister: varies with usage; replace it when odors start to return |
Amaircare may change specifications without notice.
Not sure which MultiPro setup fits your job? Email us at contactus@usairpurifiers.com, and we’ll help you choose, or call (888) 231-1463.
To learn more, download or visit our helpful information:
Amaircare’s product catalogs are on the Product Catalog tab.
Use the Activated Carbon Adsorbency Ratings above to see how well activated carbon adsorbs a long list of substances. Some reactive gases, such as ammonia and formaldehyde, don’t adsorb well on plain carbon, so for those we may recommend an impregnated carbon in the Ultra canister, such as Formaldezorb, which may cost extra. Tell us what you need to filter, and we’ll help you choose.
Your MultiPro Heavy VOC uses the media pad prefilter, the MERV 8 pleated prefilter right behind it and the 14″ Ultra carbon canister, highlighted in yellow below, and NO HEPA. It also comes with a bonus HEPA for later use. Each filter is sold separately, and since every MultiPro is the same machine, you can go back to a HEPA setup any time.
| Filter | What’s Inside | When to Change |
|---|---|---|
| Media Pad PreFilter, Pack of 24 or Pack of 48 Your MultiPro Heavy VOC uses this filter | Packs of 24 or 48 disposable media pads (24x91-A-D0919-NA or 48x91-A-D0919-NA, formerly AFC1000726), 13″ x 13″ x 1″. With no HEPA in this setup, the prefilters handle the larger particles. | Put in a fresh pad whenever it’s coated with dust, and at least every 12 months |
| MERV 8 Pleated PreFilter, Pack of 8 Your MultiPro Heavy VOC uses this filter | 8 pleated MERV 8 prefilters (8x91-A-D020-NA, formerly AFC1057554), 13″ x 13″ x 2″, the second layer: right behind the media pad and in front of the carbon. | Change as needed, often with the media pad or about once per 3 media pad changes (8 MERV 8s to a pack; media pads come 24 or 48 to a pack) |
| 14″ Ultra Carbon VOC Canister, Estimated 25 lb Your MultiPro Heavy VOC uses this filter | One Ultra carbon canister (94-A-1402-UL with standard carbon; 94-A-1405-UL with Formaldezorb), an estimated 25 lb canister of granulated carbon pellets in steel mesh. It sits in the HEPA’s place, so this unit has NO HEPA. Carbon choices include standard, Formaldezorb, Multizorb and Acidzorb (also called Acidezorb). | Carbon life varies with usage; replace the canister when odors start to come back |
| Going back to your bonus HEPA? These filters fit the HEPA setups: | ||
| 14″ Easy Twist HEPA Filter | One 14″ Easy Twist Perfect Seal HEPA (90-A-14ME-ET), the same filter as your bonus HEPA, for when it needs replacing. It takes the Ultra canister’s place in the HEPA setups, our MultiPro HEPA and MultiPro HEPA & Carbon. | Check it every 2 years and replace it when the outer media darkens: about 2 years in commercial use, 2–5 years in general |
| 5 lb Inner Carbon Canister | One 5 lb Easy Twist carbon canister (94-A-1402-ET with standard carbon, 94-A-1405-ET with Formaldezorb) that goes inside the HEPA, for particulates plus moderate VOCs, as in our MultiPro HEPA & Carbon. | Estimated once a year, depending on contamination |
| Inner Carbon Blanket, Pack of 12 | A pack of 12 inner carbon blankets (92-A-1401-ET) that fit inside the HEPA for light VOCs, as in our MultiPro HEPA. | Roughly every 6 months, or sooner when odors pick up |
| Washable Foam 14″ PreFilter, Pack of 24 | Pack of 24 washable foam sleeves (91-A-1407-ET) to protect the HEPA in a HEPA setup; usually not included with a new unit. | Check every 3 months, vacuum or hand wash, and replace yearly |
Before you begin: unplug the MultiPro and suit up with protective clothing and a mask.
Going back to your bonus HEPA? The HEPA that came with your MultiPro twists on in the Ultra canister’s place, sealing on its O-ring. Add an inner carbon blanket inside it for light VOCs, or a 5 lb carbon canister inside it for moderate VOCs, and the unit becomes our MultiPro HEPA or MultiPro HEPA & Carbon. The washable foam sleeve can go over the HEPA as well.
The red Change Filter light comes on when airflow drops; start with the prefilters and the inlet. You’ll find a video on the Video tab, too.
Sign up for our free Filter Reminder Program, and we’ll remind you when new filters are due. Questions about the Ultra canister or carbon choices? Email us at contactus@usairpurifiers.com, or call (888) 231-1463.
I purchased the airwash MultiPro about 4 monthes ago and use it in my 30 x 60 shop.
I airbrush (paint), plasma cut, weld and grind in my shop and just move the fan around to each location. I did mount it to a cart for ease of moving even though it doesn't really need it.
It works great for all of my applications.
Wish I would have purchased years ago for my lung health.
It is a little loud when the fan is running wide open, but otherwise a great device.
We are a printing company and purchased this unit to combat odors and reduce harmful VOC's. Our employees have noticed a big difference in not only how their work area smells but also how much better they feel. Barb was very helpful in helping us find a unit that fit our needs and has been great to work with.
We purchased (2) MultiPro units for our Evidence Narcotics Vault to help minimize the strong odors. The units have helped tremendously in reducing the odors which used to permeate into our work area. The odors are greatly reduced and are now confined to that small area. Barb was extremely knowledgeable and helpful in recommending just the right product to fit our needs. She provided the best customer service and was always able to answer any questions or concerns. It was nice to receive a follow-up by Barb to inquire if the products purchased were working for us. Barb, thanks so much for the exceptional customer service!
Debbie
Property & Evidence Tech/ HPD