The Amaircare Airwash MultiPro BOSS Heavy Duty Portable Air Scrubber with a Focus on Strong Particulates and Moderate VOCs (AH2000 cart with upgrade VOC filter kits) is a top-quality, heavy-duty portable air purifier for a wide variety of industrial applications. The Amaircare Airwash MultiPro BOSS Air Scrubber with a Strong Particulates and Moderate VOC focus is configured with a prefilter, a MERV 8 filter, two Perfect Seal HEPA filters, and two 7 lb carbon canisters. It is a commercial-grade air scrubber that focuses on strong particulate contaminants and moderate VOCs, gases, and odors. It offers 1800–2000 CFM and comes with a 5-YEAR Limited Warranty on the Motor/Fan and 1 YEAR on All Other Parts Except Filters.
BOSS units use 2 sets of the annual kits and 2 HEPAs.
When a job has both fine particles and odors to deal with, the Amaircare Airwash MultiPro BOSS HEPA & VOC takes on the two together. It’s Amaircare’s heavy-duty portable BOSS, the AH2000 cart, set up with HEPA and carbon: an inlet media pad with a MERV 8 pleated prefilter right behind it, two Perfect Seal HEPA cartridges and two 7 lb activated carbon canisters, one inside each HEPA. This top-quality, commercial-grade air scrubber focuses on strong particulate contaminants and moderate VOCs, gases and odors across a wide variety of industrial applications and large commercial spaces, and upgrade VOC filter kits let you choose the carbon.
Power, versatility and affordability in one machine: the trifecta of air scrubbers.
Inside, two filter sets work side by side, so you get two of each filter. Air passes through the prefilters at the inlet first, then a foam filter wrapped around each HEPA, then the HEPA media, and finally the carbon canister at the center of each cartridge.
Pick your carbon in the Type of Carbon menu: Standard Activated Carbon for a wide range of VOCs, gases and odors, or Formaldezorb, which adds a focus on formaldehyde.
Your BOSS HEPA & VOC ships with the two 7 lb canisters, and you can change your mind when the carbon is due. The 16 in ET Plus Annual VOC Filter Kit for each filter set comes with a pleated filter OR a 7 lb carbon canister for stronger protection, so you choose the VOC help each time.
The carbon canisters ship separately to avoid damage, so they need to be installed once everything arrives. Each canister slides into the center of its HEPA cylinder, smaller end first, until the metal edges at its base meet the HEPA. The Filter Maintenance tab walks you through every step, and we’re glad to help by email if you have questions.
For mold remediation, the HEPA & VOC is the BOSS setup we recommend most. Its HEPAs do an excellent job on mold spores, and at 99.96% efficiency at 0.1 microns, they catch the tiny particles mycotoxins ride on, too. Meanwhile, the carbon adsorbs the musty mold gases (MVOCs) behind that damp, basement smell and helps with mycotoxins in its pores. The moisture problem has to be fixed first; our guide, Air Purifiers for Mold in Basements, explains why.
Something to keep in mind: every BOSS is identical, and only the filters change with the filtration you need. Simply changing the filter configuration lets the BOSS accommodate virtually any industry’s needs, so if your usage changes with time, you can convert your unit by replacing the filters to match. For particles first, with optional carbon blankets for light VOCs, see the Amaircare BOSS HEPA. For heavy VOCs, gases and odors, the Amaircare BOSS Heavy VOC replaces both HEPAs with two estimated 30 lb Ultra carbon canisters and includes its two HEPAs as a bonus for later use. The Common Uses tab lays out all three.
Built from 24-gauge steel under a powder coat, the BOSS rides on casters mounted underneath and has six handles, so it rolls in and out of a job without a fight. Its 12 in intake and outflow collars accept ducting for positive pressure, to keep the air inside a clean room at its best, or negative pressure, to keep a hazard contained. The variable speed control sets the airflow, the red Change Filter light lets you know when airflow drops, and the filter section opens easily for service. Amaircare makes the BOSS in Canada for industrial and commercial use.
Amaircare lists a maximum recommended area of 14,000 sq ft for the BOSS, but every commercial space is different. Jobs with heavy contaminants need more than one air change each hour, and heavy smoke or VOC areas may even call for 10 to 12. When VOCs are part of the goal, figure your numbers at medium speed, because slower air spends more time in contact with the carbon. The unit also has to clean faster than odors and chemicals are coming in, so consider the source, too. Ratings are estimates from lab-style testing on high, and filter loading, voltage and ducting all affect real airflow, so size up when in doubt.
Send us your floor area, ceiling height and the odors or chemicals involved, and we’ll help you run the numbers. Our Air Changes per Hour Calculator can help, too.
Have a particular odor or chemical in mind? Email us at contactus@usairpurifiers.com, and we’ll help you match the carbon to the job, or call (888) 231-1463.
The machines themselves are identical, and only the filters differ with the filtration needed, so you can change the configuration whenever your usage changes.
Amaircare’s four most common carbon types for the BOSS are:
This page’s Type of Carbon menu offers Standard Activated Carbon and Formaldezorb.
Please note: CFM (cubic feet per minute), ACH (air changes per hour) and coverage are estimates from factory and/or independent testing, usually run with the unit on high in an open, lab-like setting. Actual results vary for many reasons, the motor and the filters among them, and filter loading, lower voltage to the motor, and inlet or outlet ducting can all affect airflow. Treat these ratings as a general guideline only.
Common Manufacturer Model Numbers for this product:
26-A-1KME-00 (Amaircare Airwash MultiPro BOSS, also known as AH2000)
Free Shipping
Amaircare MultiPro Media Pad PreFilter, 24x91-A-D0919-NA, Pack of 24
Free Shipping
Amaircare MultiPro Media Pad PreFilter, 48x91-A-D0919-NA, Pack of 48
Free Shipping
Amaircare MultiPro PreFilter, 8x91-A-D020-NA, Pleated Pre filter, Pack of 8
Free Shipping
Amaircare 16 ET HEPA Filter for Larger Purifiers and Air Scrubbers
Free Shipping
Amaircare 16 in ET Plus Annual VOC Filter Kit for Larger Purifiers and Air Scrubbers
Free Shipping
Amaircare 3000 Annual VOC Filter Kit - 16 in
Free Shipping
Amaircare 7 lb Carbon Canister Without Prefilters
Barb Lulay demonstrates the Easy Twist Filters and installing a VOC canister into a HEPA unit using an Amaircare 3000 unit.
Free Shipping
Amaircare 7500 Chem Bio AirWash Air Scrubber Optional VOC Inner Canisters
Free Shipping
Amaircare Airwash MultiPro HEPA Air Scrubber Moderate VOC Focus with 5 lb Carbon Canister
Free Shipping
Amaircare Airwash MultiPro BOSS HEPA Air Scrubber for Strong Particulates and Optional Light VOCs
Free Shipping
Amaircare Airwash MultiPro BOSS Air Scrubber for Heavy VOCs with 2 Est. 30 lb Carbon Canisters
Browse Amaircare’s air scrubbers and industrial air filtration systems in the Amaircare Air Scrubber Industrial Product Catalog (PDF).
For Amaircare’s portable, whole-house and commercial HEPA air filtration systems, plus replacement filters and maintenance schedules, see the Amaircare Product Catalog (PDF). This catalog is from 2016, so some models in it are no longer made. For current models and filters, see our Amaircare air purifiers or email us at contactus@usairpurifiers.com.
The BOSS has a wide range of uses. If you’re looking for versatility, power and affordability in one air scrubber, this is the unit for you. Every setup below is the same machine with a different filter configuration, so pick the one that matches what’s in the air on your job. Carbon blankets go inside the HEPAs for light VOCs; a 7 lb carbon canister or a pleated filter goes inside each HEPA for moderate VOCs; and for heavy VOCs, two estimated 30 lb Ultra canisters take the HEPAs’ place, with the HEPAs kept as a bonus for later use. When the work changes, you can switch filters and change the setup. Click a setup to see its full details.
| Setup | Best For | HEPA | Filters (two of each) | Replacement Filters |
|---|---|---|---|---|
| Amaircare BOSS HEPA | Strong particulates: dust, mold spores and other fine particles, with optional light VOC help | Yes | 1. Media pad prefilter, with a MERV 8 pleated prefilter right behind it 2. Foam filter over each HEPA 3. Two Perfect Seal HEPA cartridges 4. Optional carbon inner blankets | Two 16 in ET Annual Standard Filter Kits a year HEPA cartridges about every 2 years in commercial use Inlet prefilters as they load |
| Amaircare BOSS HEPA & VOC | Strong particulates plus moderate VOCs, gases and odors | Yes | 1. Media pad prefilter, with a MERV 8 pleated prefilter right behind it 2. Foam filter over each HEPA 3. Two Perfect Seal HEPA cartridges 4. Inside the HEPAs: two 7 lb carbon canisters OR two pleated filters | Two 16 in ET Plus Annual VOC Filter Kits a year HEPA cartridges about every 2 years in commercial use Inlet prefilters as they load |
| Amaircare BOSS Heavy VOC | Heavy VOCs, chemicals, gases and odors | No (2 bonus HEPAs for later use) | 1. Media pad prefilter, with a MERV 8 pleated prefilter right behind it 2. Foam filter over each canister 3. Two estimated 30 lb VOC Ultra carbon canisters in place of the HEPAs | Two 16 in VOC Ultra 30 lb Filter Kits, an estimated 12 months apart, depending on contamination levels Inlet prefilters as they load |
Amaircare may change specifications without notice.
Amaircare also recommends the BOSS for gyms and for medical buildings such as hospitals, pharmacies, walk-in clinics and doctors’ offices, depending on the size of the space.
Not sure which setup your job needs? Email us at contactus@usairpurifiers.com with your space and what you’re filtering, and we’ll help you choose, or call (888) 231-1463.
To learn more, download or visit our helpful information:
Amaircare’s product catalogs are on the Product Catalog tab.
Note: Straight activated carbon doesn’t have much capacity for some reactive gases, such as ammonia and formaldehyde. Where a gas is chemically reactive, an appropriate impregnated activated carbon can be recommended, and there may be an extra charge for it. If you need filtration for a specific chemical and would like more details, email us at contactus@usairpurifiers.com or reach us through our contact page, or call (888) 231-1463.
The BOSS is a top-quality, heavy-duty portable air scrubber for a wide variety of industrial applications, and you can configure its filters to suit the job. With two filter sets side by side, it takes two of each filter. Your BOSS HEPA & VOC uses the media pad and MERV 8 pleated prefilters, two 16 in ET Plus Annual VOC Filter Kits a year (each with a pleated filter or a 7 lb carbon canister) and two HEPA cartridges, highlighted in yellow below. The other kits change the same unit to a BOSS HEPA for particles or a BOSS Heavy VOC for heavy chemicals, any time your needs change.
| Kit or Filter | What’s Inside | When to Change |
|---|---|---|
| MultiPro Media Pad Prefilter Your BOSS HEPA & VOC uses this prefilter | 13 in x 13 in media pad prefilters, the first filter at the inlet, sold in a pack of 24 or an extra-savings pack of 48 | Replace the media pad whenever it’s covered in particulate |
| MultiPro Pleated Prefilter, MERV 8 Your BOSS HEPA & VOC uses this prefilter | 13 in x 13 in x 2 in pleated prefilters rated MERV 8, pack of 8. It sits right behind the media pad. | As needed: often along with the media pad, or once for every 3 media pad changes (the MERV 8 comes in packs of 8 and the media pads in packs of 24) |
| 16 in ET Plus Annual VOC Filter Kit Your BOSS HEPA & VOC uses two of these kits a year | 1 foam prefilter (1/8 in), 1 VOC canister and 1 O-ring gasket. Choose a 7 lb canister of standard activated carbon (1,550 g of carbon), a 7 lb Formaldezorb canister or the pleated VOC canister. The BOSS takes two kits a year, one for each filter set. | Foam prefilter: check about every 3 months, vacuum or hand-wash as needed, replace once a year VOC canister: once a year, or sooner when odors noticeably increase |
| 16 in ET HEPA Filter Your BOSS HEPA & VOC uses two of these filters | 1 Perfect Seal HEPA cartridge, 16 in Easy Twist (Amaircare part 90-A-16ME-ET), sold separately. The BOSS takes two. | Check every 2 years, and replace it when the outside of the media turns dark, usually about every 2 years in commercial use |
| To change your setup, you can also choose: | ||
| 7 lb Carbon Canister Without Prefilters | 1 Easy Twist 7 lb carbon canister, standard carbon or Formaldezorb, with no prefilter. It fits inside the 16 in Easy Twist HEPA. | About once a year, though contamination levels can change that |
| 16 in ET Annual Standard Filter Kit | 1 foam prefilter (1/8 in), 2 carbon inner blankets (½ in media with 164 g of activated carbon each) and 1 O-ring gasket. The BOSS takes two kits a year, one for each filter set. | Foam prefilter: check about every 3 months, vacuum or hand-wash as needed, replace once a year Carbon blankets: about every 6 months (each kit has two) |
| 16 in VOC Ultra 30 lb Filter Kit | 1 foam prefilter (1/8 in), 1 VOC Ultra carbon canister (estimated 30 lb, with 9,475 g of carbon) and 1 O-ring gasket, with standard carbon or a specialty blend. The canister goes in place of the HEPA. The BOSS takes two kits, one for each filter set. | Foam prefilter: check about every 3 months, vacuum or hand-wash as needed, replace once a year Ultra canister: an estimated 12 months, depending on contamination levels; many clients get longer out of it because it’s so large |
| 16 in Formaldezorb VOC Ultra 30 lb Filter Kit | The same kit filled with Formaldezorb carbon (9,475 g), designed specifically for formaldehyde, such as from hair smoothing treatments. It also goes in place of the HEPA. | Foam prefilter: typically once a year Ultra canister: as its efficiency drops, often about once a year |
Two of everything: the BOSS holds two filter sets, so it takes two foam filters, two HEPA cartridges and two carbon canisters at a time, plus the inlet prefilters. Order your kits and HEPAs in pairs. The 7 lb Carbon Canister Without Prefilters lets you replace just the canisters when that’s all you need.
First things first: disconnect the BOSS from power and let the fan come to a full stop. Put on suitable clothing and a mask, and use your site’s usual precautions, since the filters hold whatever they’ve captured.
Step 1, the inlet prefilters (Stage 1):
Step 2, lift out each HEPA cartridge (Stage 3):
Step 3, replace the foam filter (Stage 2):
Step 4, swap the carbon canister (Stage 4):
Step 5, a new HEPA cartridge when it’s due (Stage 3):
Switching to carbon blankets instead? After the canister comes out, unwrap a new inner carbon blanket, unroll it and roll it the other way so it curves with the HEPA, set it inside the cylinder and let it open until the ends meet and it’s snug against the HEPA. To take an old blanket out later, find its two ends inside the HEPA, pull one end inward and roll it loosely so it lifts free.
When the red Change Filter light comes on, airflow through the BOSS has dropped, usually from loaded filters or a restricted intake. Check the prefilters first.
Join our free Filter Reminder Program for an email when it’s time for new filters. Have a filter question? Email us at contactus@usairpurifiers.com, or call (888) 231-1463.