The Amaircare Airwash MultiPro BOSS Heavy Duty Portable Air Scrubber with a Focus on Heavy VOCs (AH2000 cart with upgrade ULTRA VOC canisters) is a top-quality, heavy-duty portable air purifier for a wide variety of industrial applications. The Amaircare Airwash BOSS Air Scrubber with a HEAVY VOC focus is configured with a prefilter, a MERV 8 filter, and two estimated 30 lb carbon canisters (an estimated 60 lbs total). It is a commercial-grade air scrubber that focuses on heavy VOCs, gases, and odors. It offers 1800–2000 CFM and comes with a 5-YEAR Limited Warranty on the Motor/Fan and 1 YEAR on All Other Parts Except Filters. This unit does NOT have a HEPA filter because the focus is on heavy odors, gases, and VOCs. The Ultra filter kits ship separately, so your unit still arrives with the prefilters and HEPAs that come in the standard unit (AKA the BOSS HEPA). Once you install the Ultra kits, that leaves you with 2 BONUS HEPAs to use at a later time.
BOSS units use 2 sets of the annual kits (2 VOC Ultra kits for this build).
For jobs where chemicals, gases and strong odors are the main problem, the Amaircare Airwash MultiPro BOSS Heavy VOC puts its filtering power into carbon. This is the heavy-duty portable BOSS from Amaircare (model AH2000 cart, also known as AirWash), fitted with upgrade ULTRA VOC canisters: a media pad prefilter at the inlet with a MERV 8 pleated prefilter right behind it, and two estimated 30 lb carbon canisters from the 16 in Ultra VOC kit, an estimated 60 lbs of canisters in all. This top-quality, commercial-grade air scrubber is made for heavy adsorption on all kinds of industrial jobs and in large commercial spaces. It focuses on heavy VOCs, gases and odors, while its prefilters catch larger particulate contaminants along the way.
This unit does NOT have a HEPA filter, because its focus is heavy odors, gases and VOCs. The two Ultra canisters sit where the HEPA cartridges go in the other BOSS setups, and the HEPAs themselves come with your unit as a bonus for later use.
High power, versatile and affordable, the BOSS is truly the trifecta of air scrubbers.
Each VOC Ultra canister is a steel mesh cylinder filled with pellets of granulated activated carbon. Amaircare rates each one at 9,475 g of carbon and 10,422,500 m² of surface area for adsorption, so the pair holds 18,950 g, about 41.8 lb of carbon inside an estimated 60 lb of canisters. Each Ultra canister holds over six times the carbon of a 7 lb canister in the Amaircare BOSS HEPA & VOC.
The BOSS can accommodate virtually any industry’s needs by changing its filter configuration or its type of carbon. All four of the most common carbon types are on this page’s menu:
Where formaldehyde is the main concern, such as during hair smoothing treatments, our 16 in Formaldezorb VOC Ultra kit is designed specifically for formaldehyde and related chemicals.
Activated carbon traps gases by adsorption: molecules stick to the surfaces inside its pores until those surfaces are used up. More carbon means more of that surface, so a heavy, steady chemical load calls for a large carbon bed like this one. How long the carbon lasts still depends on which chemicals are in the air, how concentrated they are, how quickly they’re coming in and the air changes the unit delivers. Truly clean air doesn’t smell like anything, so odors coming from the unit mean the carbon is reaching its limit. Amaircare notes that carbon at capacity can start releasing some of what it captured as new molecules arrive, so changing the canisters on time matters.
Amaircare’s air scrubber catalog promotes the AH2000 for fume extraction and source capture in welding, laser work, printing, woodworking, steel fabrication and more. Duct the 12 in intake close to where the fumes start, and the BOSS pulls them in before they drift through the space. In this Heavy VOC setup, the carbon goes after the gases, solvents and odors in those fumes; when smoke or fine particles are part of the mix, a BOSS setup with HEPA is the better fit, and your bonus HEPAs get you there.
Your BOSS Heavy VOC is shipped as the standard unit (AKA the BOSS HEPA), with its prefilters and two Perfect Seal HEPA cartridges in place. The two VOC Ultra filter kits travel in their own boxes. When you install the Ultra canisters, the HEPAs come out and stay with you: two bonus HEPAs to use at a later time, ready for a job that’s more about fine dust, mold spores or smoke particles than chemicals.
Every BOSS is the same machine; the filters decide its focus. If your usage changes, you can simply change the filter configuration. When you put the bonus HEPAs back in, you get Amaircare’s individually tested filtration, built to meet HEPA standards and beyond: with HEPA, the complete system is rated for at least 99.97% of particles as small as 0.3 microns (about 1/300th the size of a human hair, or 0.000012 of an inch) and 99.96% efficiency at 0.1 microns. For moderate VOCs, gases and odors on top of strong particulates, the Amaircare BOSS HEPA & VOC pairs two HEPAs with two 7 lb carbon canisters or two pleated filters. And when particles are the main concern, the Amaircare BOSS HEPA runs two HEPAs, with carbon blankets as an option for light VOCs. The Common Uses tab compares all three setups.
The BOSS housing is 24-gauge steel with a durable powder coat, mounted on bottom casters, with six handles for moving it between rooms or job sites. Twelve-inch collars on the intake and outflow take ducting for source capture or for positive and negative pressure work. Set the airflow with the variable speed control, and watch for the red Change Filter light, which signals that airflow has dropped. The filter section is easy to open for maintenance, and Amaircare builds the unit in Canada for commercial and industrial settings.
Amaircare’s maximum recommended area for the BOSS is 14,000 sq ft. A heavy chemical job needs more than one air change every hour, and heavy smoke or VOC areas may even call for 10 to 12, so one unit handles less floor area than that maximum. Figure your sizing at medium speed, since air that moves more slowly stays in contact with the carbon longer. Plan to stay ahead of the source, too, because the BOSS has to clean the air faster than chemicals enter it. Ratings come from testing on high in an open setting, and filter loading, reduced voltage and ducting all change real airflow. When in doubt, size up or add a unit.
Send the square footage, ceiling height and chemicals involved to us by email, and we’ll work through the numbers with you, or run them through our Air Changes per Hour Calculator.
Working with a specific chemical? Write to us at contactus@usairpurifiers.com and tell us what you’re up against, and we’ll share the details, or call (888) 231-1463.
Please note: this BOSS is configured with two estimated 30 lb carbon canisters (an estimated 60 lbs of canisters) instead of the standard HEPA-only configuration, so some specs may vary.
It’s the same machine in all three; the filters vary with the filtration needed, so the configuration can change as your usage does.
About these numbers: CFM (cubic feet per minute), ACH (air changes per hour) and coverage ratings are estimates. They come from factory and/or independent tests, typically on high in an open setting much like a lab, and actual results may vary for a wide realm of reasons, including the motor and the filters. Filter loading, reduced voltage to the motor, and ducting at the inlet or outlet may affect airflow, so use them as a general guideline only.
Common Manufacturer Model Numbers for this product:
26-A-1KME-00 (Amaircare Airwash MultiPro BOSS, also known as AH2000)
Free Shipping
Amaircare MultiPro Media Pad PreFilter, 24x91-A-D0919-NA, Pack of 24
Free Shipping
Amaircare MultiPro Media Pad PreFilter, 48x91-A-D0919-NA, Pack of 48
Free Shipping
Amaircare MultiPro PreFilter, 8x91-A-D020-NA, Pleated Pre filter, Pack of 8
Free Shipping
Amaircare 16 in VOC Ultra 30 lbs Filter Kit Larger Air Scrubbers
Free Shipping
Amaircare 16 in Formaldezorb VOC Ultra 30 lbs Filter Kit Larger Air Scrubbers
Barb Lulay demonstrates the Easy Twist Filters and installing a VOC canister into a HEPA unit using an Amaircare 3000 unit.
Free Shipping
Amaircare Airwash MultiPro BOSS Air Scrubber for Strong Particulates and Moderate VOCs
Free Shipping
Amaircare Airwash MultiPro Air Scrubber Heavy VOC Focus with Est. 25 lb Carbon Canister
Free Shipping
Amaircare 7500 Chem Bio AirWash Air Scrubber Optional VOC Inner Canisters
Free Shipping
Amaircare 10000 Heavy Duty Air Filtration System For Heavy VOCs
Browse Amaircare’s air scrubbers and industrial air filtration systems in the Amaircare Air Scrubber Industrial Product Catalog (PDF).
For Amaircare’s portable, whole-house and commercial HEPA air filtration systems, plus replacement filters and maintenance schedules, see the Amaircare Product Catalog (PDF). This catalog is from 2016, so some models in it are no longer made. For current models and filters, see our Amaircare air purifiers or email us at contactus@usairpurifiers.com.
The BOSS has a wide range of uses. If you’re looking for versatility, power and affordability in one air scrubber, this is the unit for you. Every setup below is the same machine with a different filter configuration, so pick the one that matches what’s in the air on your job. Carbon blankets go inside the HEPAs for light VOCs; a 7 lb carbon canister or a pleated filter goes inside each HEPA for moderate VOCs; and for heavy VOCs, two estimated 30 lb Ultra canisters take the HEPAs’ place, with the HEPAs kept as a bonus for later use. When the work changes, you can switch filters and change the setup. Click a setup to see its full details.
| Setup | Best For | HEPA | Filters (two of each) | Replacement Filters |
|---|---|---|---|---|
| Amaircare BOSS HEPA | Strong particulates: dust, mold spores and other fine particles, with optional light VOC help | Yes | 1. Media pad prefilter, with a MERV 8 pleated prefilter right behind it 2. Foam filter over each HEPA 3. Two Perfect Seal HEPA cartridges 4. Optional carbon inner blankets | Two 16 in ET Annual Standard Filter Kits a year HEPA cartridges about every 2 years in commercial use Inlet prefilters as they load |
| Amaircare BOSS HEPA & VOC | Strong particulates plus moderate VOCs, gases and odors | Yes | 1. Media pad prefilter, with a MERV 8 pleated prefilter right behind it 2. Foam filter over each HEPA 3. Two Perfect Seal HEPA cartridges 4. Inside the HEPAs: two 7 lb carbon canisters OR two pleated filters | Two 16 in ET Plus Annual VOC Filter Kits a year HEPA cartridges about every 2 years in commercial use Inlet prefilters as they load |
| Amaircare BOSS Heavy VOC | Heavy VOCs, chemicals, gases and odors | No (2 bonus HEPAs for later use) | 1. Media pad prefilter, with a MERV 8 pleated prefilter right behind it 2. Foam filter over each canister 3. Two estimated 30 lb VOC Ultra carbon canisters in place of the HEPAs | Two 16 in VOC Ultra 30 lb Filter Kits, an estimated 12 months apart, depending on contamination levels Inlet prefilters as they load |
Amaircare may change specifications without notice.
Amaircare also recommends the BOSS for gyms and for medical buildings such as hospitals, pharmacies, walk-in clinics and doctors’ offices, depending on the size of the space.
Not sure which setup your job needs? Email us at contactus@usairpurifiers.com with your space and what you’re filtering, and we’ll help you choose, or call (888) 231-1463.
To learn more, download or visit our helpful information:
Amaircare’s product catalogs are on the Product Catalog tab.
About reactive gases: plain activated carbon holds only a little of some chemically reactive gases, ammonia and formaldehyde among them. For those, an appropriate impregnated activated carbon can be the better recommendation, sometimes at an extra charge, which is why this page’s Type of Carbon menu offers Formaldezorb, Acidzorb and Multizorb beside standard activated carbon. Tell us the chemical you need filtered at contactus@usairpurifiers.com, through our contact page, or at (888) 231-1463, and we’ll share more details.
The BOSS is a top-quality, heavy-duty portable air scrubber for a wide variety of industrial applications, and its filters can be set up for the job at hand. Because it holds two filter sets, it takes two of each filter. Your BOSS Heavy VOC uses the media pad and MERV 8 pleated prefilters plus two 16 in VOC Ultra 30 lb Filter Kits, or two Formaldezorb VOC Ultra kits when formaldehyde is the focus, highlighted in yellow below. It has NO HEPA in use, and its two bonus HEPAs are yours for later. If particles become a bigger concern, put the bonus HEPAs back in, and the kits below turn the same unit into a BOSS HEPA or a BOSS HEPA & VOC.
| Kit or Filter | What’s Inside | When to Change |
|---|---|---|
| MultiPro Media Pad Prefilter Your BOSS Heavy VOC uses this prefilter | 13 in x 13 in media pad prefilters, the first filter at the inlet, sold in a pack of 24 or an extra-savings pack of 48 | Replace the media pad whenever it’s covered in particulate |
| MultiPro Pleated Prefilter, MERV 8 Your BOSS Heavy VOC uses this prefilter | 13 in x 13 in x 2 in pleated prefilters rated MERV 8, pack of 8. It sits right behind the media pad. | As needed: often along with the media pad, or once for every 3 media pad changes (the MERV 8 comes in packs of 8 and the media pads in packs of 24) |
| 16 in VOC Ultra 30 lb Filter Kit Your BOSS Heavy VOC uses two of these kits | 1 foam prefilter (1/8 in), 1 VOC Ultra carbon canister (estimated 30 lb, with 9,475 g of carbon) and 1 O-ring gasket, with standard carbon or a specialty blend. The canister goes in place of the HEPA. The BOSS takes two kits, one for each filter set. | Foam prefilter: check about every 3 months, vacuum or hand-wash as needed, replace once a year Ultra canister: an estimated 12 months, depending on contamination levels; many clients get longer out of it because it’s so large |
| 16 in Formaldezorb VOC Ultra 30 lb Filter Kit Or two of these kits for formaldehyde | The same kit filled with Formaldezorb carbon (9,475 g), designed specifically for formaldehyde, such as from hair smoothing treatments. It also goes in place of the HEPA. | Foam prefilter: typically once a year Ultra canister: as its efficiency drops, often about once a year |
| Going back to your bonus HEPAs? Choose one type of annual kit (two a year), and replace the HEPAs when they’re due: | ||
| 16 in ET Annual Standard Filter Kit | 1 foam prefilter (1/8 in), 2 carbon inner blankets (½ in media with 164 g of activated carbon each) and 1 O-ring gasket. The BOSS takes two kits a year, one for each filter set. | Foam prefilter: check about every 3 months, vacuum or hand-wash as needed, replace once a year Carbon blankets: about every 6 months (each kit has two) |
| 16 in ET Plus Annual VOC Filter Kit | 1 foam prefilter (1/8 in), 1 VOC canister and 1 O-ring gasket. Choose a 7 lb canister of standard activated carbon (1,550 g of carbon), a 7 lb Formaldezorb canister or the pleated VOC canister. The BOSS takes two kits a year, one for each filter set. | Foam prefilter: check about every 3 months, vacuum or hand-wash as needed, replace once a year VOC canister: once a year, or sooner when odors noticeably increase |
| 7 lb Carbon Canister Without Prefilters | 1 Easy Twist 7 lb carbon canister, standard carbon or Formaldezorb, with no prefilter. It fits inside the 16 in Easy Twist HEPA. | About once a year, though contamination levels can change that |
| 16 in ET HEPA Filter | 1 Perfect Seal HEPA cartridge, 16 in Easy Twist (Amaircare part 90-A-16ME-ET), sold separately. The BOSS takes two. | Check every 2 years, and replace it when the outside of the media turns dark, usually about every 2 years in commercial use |
Two of everything: the BOSS holds two filter sets, so it takes two foam filters and two Ultra canisters at a time, plus the inlet prefilters. Each VOC Ultra kit has the foam filter, canister and O-ring for one filter set, so order them in pairs.
Safety first: unplug the unit, and wait until the fan has stopped completely. Dress for the job with appropriate clothing and a mask, and work by your established procedures so contaminants stay in the filters and out of the air.
1. Inlet prefilters (Stage 1)
2. Take out each VOC Ultra canister (Stage 3, in place of the HEPAs)
3. Foam filter (Stage 2)
4. Fit the new Ultra canister (Stage 3)
Going back to your bonus HEPAs? The two HEPA cartridges that came with your BOSS lock onto the bulkhead the same way the Ultra canisters do, with a new O-ring and a foam filter over each one. Inside each HEPA you can add an inner carbon blanket (take off its shrink wrap, roll it the opposite way, set it in and let it open until the ends butt together and it sits snug against the HEPA) or a VOC canister, either a 7 lb carbon canister or a pleated filter (unwrap it, slide it in smaller end first until its metal base meets the HEPA, and hold it with your fingers while you reinstall the cylinder). A blanket comes back out by finding its two ends, pulling one in and rolling it loosely; a canister pulls straight out.
A red Change Filter light means airflow through the BOSS has dropped, often from loaded filters or a restricted air intake. Look at the prefilters first.
Sign up for our free Filter Reminder Program, and we’ll send a reminder when filters are due. Filter questions? Email us at contactus@usairpurifiers.com, or call (888) 231-1463.