The Amaircare ES3X is a high-quality HEPA air purification unit with a focus on particulates and moderate VOCs, featuring:
ES3X units use 3 sets of the annual kits and 3 HEPAs.
Built for spaces where fumes and dust show up together, the Amaircare Airwash ES3X TriHEPA for Moderate VOCs puts a Perfect Seal HEPA and an estimated 7 lb carbon canister in each of its three filter sets. That lets one suspended, stand-alone unit work on fine dust and particles along with low to moderate VOCs, fumes and odors. It’s the setup Amaircare ships as standard, and it handles spaces up to 15,000 sq ft at 1 air change per hour with 8 ft ceilings.
Think of an auto body shop with sanding dust and paint odors, a mechanical garage or first responder vehicle bay with exhaust, or a vape or hookah lounge with lingering vapor and smoke odor. Mounted overhead, the ES3X keeps the floor clear and pulls polluted air up, away from the people below.
Configured as shown here, the unit holds 3 individual filter sets, and every one has a prefilter, a high-quality HEPA and an estimated 7 lb carbon canister. A durable steel cabinet keeps the sets contained and protected, and the TriHEPA layout keeps plenty of air moving.
That’s nearly ten times the carbon of the carbon blanket in the light setup (estimates: 1,550 g vs 164 g per set), which gives the unit much more room to hold VOCs and odors before the carbon is due for a change. When it is, each 16″ ET Plus Annual VOC Filter Kit offers a pleated filter OR an estimated 7 lb carbon canister for stronger protection.
With HEPA and carbon together, this setup helps on both fronts of a mold problem. The HEPA traps mold spores, along with the fine particles mycotoxins travel on, and the carbon adsorbs the musty gases mold gives off (MVOCs) in its pores and helps with mycotoxins. Fix the moisture source first, then let the unit clean up the air.
Something to keep in mind: every ES3X is the same machine, and only the filters differ with the filtration needed. Should your needs shift, switching filters changes the setup:
Specialty carbon is an option, too, such as Formaldezorb for formaldehyde. Compare the three setups on the Comparison tab, and find the kits and filter-changing steps in the Filter Maintenance section of the More Info tab.
The ES3X needs no ducting. Air enters through one side of the cabinet, passes through the filters and leaves through the opposite side, cleaner. Mount it overhead and hardwire it, as we recommend, then add a variable speed controller or a simple on/off switch within easy reach, or an air quality sensor on the wall. The optional controller, a wall-mounted variable speed controller, is your choice at checkout: With Controller or Without Controller.
When VOCs are your main goal, plan your sizing at a slower fan setting, since air that moves through the carbon more slowly gives it more time to adsorb. The unit also has to clean the air faster than fumes come in, so a busy shop or lounge often needs more than the 1 air change an hour behind the 15,000 sq ft rating. Areas with heavy VOCs or smoke may even call for 10 to 12, and allergy and asthma clients often want 3 to 7. Larger spaces may need more than one unit.
Tell us about your space: send a note to contactus@usairpurifiers.com and we can size it together, or call (888) 231-1463.
There are 3 primary configurations for the ES3X. All units are versatile. The purpose of the unit can be modified simply by changing the filter configurations within the unit:
| Configuration | In Each Set (Qty of 3 Sets per Unit) | Weight | Replacement Filters |
|---|---|---|---|
| Particulate Focus & Light VOCs | Foam prefilter, Perfect Seal HEPA and carbon blanket The Light VOC listing ships with three estimated 7 lb carbon canisters; change to carbon blankets down the road | Estimated 136 lbs (the base unit) | Three 16″ ET Annual Standard Filter Kits a year, plus 3 HEPAs about every 2 years |
| Particulate Focus & Moderate VOCs (Shown) This page’s setup | Foam prefilter, Perfect Seal HEPA and an estimated 7 lb carbon canister (an estimated 21 lb of canisters in all); when the carbon is due, a pleated filter OR an estimated 7 lb carbon canister | 157 lbs (the 136 lb unit plus three estimated 7 lb canisters; Amaircare’s listed weight) | Three 16″ ET Plus Annual VOC Filter Kits a year, plus 3 HEPAs about every 2 years |
| Focus on Heavy VOCs, Gases & Odors | Foam prefilter and an estimated 30 lb ULTRA carbon canister (an estimated 90 lbs of canisters in all) PLEASE NOTE: No HEPA in this configuration. The Heavy VOC listing ships as the standard unit, so its 3 HEPAs come with it as a bonus for later use | Estimated 226 lbs (the 136 lb unit plus three estimated 30 lb Ultra canisters) | Three 16″ VOC Ultra 30 lb Filter Kits a year |
Something to keep in mind is that the machines are identical; the filters vary based on the filtration needed. With this in mind, if the usage changes with time, you can simply change your filter configuration to match your filtration needs.
Note: Amaircare may update models and specifications without notice.
Common Manufacturer Model Numbers for this product:
30-A-1KME-01 (Amaircare Airwash ES3X, also known as the Airwash Eliminator S3X and the 10000R)
Free Shipping
Amaircare 16 ET HEPA Filter for Larger Purifiers and Air Scrubbers
Free Shipping
Amaircare 16 in ET Plus Annual VOC Filter Kit for Larger Purifiers and Air Scrubbers
Free Shipping
Amaircare 3000 Annual VOC Filter Kit - 16 in
Free Shipping
Amaircare 7 lb Carbon Canister Without Prefilters
Barb Lulay demonstrates the Easy Twist Filters and installing a VOC canister into a HEPA unit using an Amaircare 3000 unit.
Free Shipping
Amaircare ES3X Tri-Carbon Suspended Air Filtration System for Heavy VOCs with 3 Est. 30 lb Canisters
Free Shipping
Amaircare 10000 Heavy Duty Air Filtration System For Heavy VOCs
Free Shipping
Amaircare 10000 Heavy Duty HEPA Air Filtration System For Moderate VOCs TriHEPA
Free Shipping
Amaircare Airwash MultiPro BOSS HEPA Air Scrubber for Strong Particulates and Optional Light VOCs
Browse Amaircare’s air scrubbers and industrial air filtration systems in the Amaircare Air Scrubber Industrial Product Catalog (PDF).
For Amaircare’s portable, whole-house and commercial HEPA air filtration systems, plus replacement filters and maintenance schedules, see the Amaircare Product Catalog (PDF). This catalog is from 2016, so some models in it are no longer made. For current models and filters, see our Amaircare air purifiers or email us at contactus@usairpurifiers.com.
Every Amaircare ES3X is the same suspended, all-steel machine, with the same motor, three filter sets and coverage for up to 15,000 sq ft at 1 air change per hour with 8 ft ceilings. What changes is the filter setup, matched to what you want the unit to do: carbon blankets for light VOCs, an estimated 7 lb carbon canister or a pleated filter for moderate VOCs, or three estimated 30 lb Ultra canisters in place of the HEPAs for heavy VOCs. You can change it any time by switching filters. Click a setup’s name for its full details.
| Setup | Best For | Filter Stages (in each of the 3 sets) | Replacement Filters (3 of each) |
|---|---|---|---|
| ES3X for Particulates & Light VOCs | Dust and fine particles first, with light protection against VOCs and odors | 1. Washable 1/8″ foam prefilter 2. 16″ Perfect Seal Easy Twist HEPA (100 sq ft of media) 3. Carbon blanket (est. 164 g of carbon) Ships with three estimated 7 lb carbon canisters; change to carbon blankets down the road | Three 16″ ET Annual Standard Filter Kits a year (each: foam prefilter and 2 carbon blankets) Three 16″ HEPA filters about every 2 years in commercial use |
| ES3X for Particulates & Moderate VOCs | Fine particles plus moderate VOCs, fumes and odors, such as dust and fumes together in a shop | 1. Washable 1/8″ foam prefilter 2. 16″ Perfect Seal Easy Twist HEPA (100 sq ft of media) 3. Estimated 7 lb carbon canister (est. 1,550 g of granulated carbon) When the carbon is due: a pleated filter OR an estimated 7 lb carbon canister | Three 16″ ET Plus Annual VOC Filter Kits a year (each: foam prefilter and a pleated filter OR an estimated 7 lb carbon canister) Three 16″ HEPA filters about every 2 years in commercial use |
| ES3X Tri-Carbon for Heavy VOCs | Heavy VOCs, chemicals, gases and odors, when particulate isn’t the main concern | 1. Washable 1/8″ foam prefilter 2. Estimated 30 lb ULTRA carbon canister (est. 9,475 g of granulated carbon) in place of the HEPA NO HEPA in use (3 bonus HEPAs for later use) | Three 16″ VOC Ultra 30 lb Filter Kits with standard carbon (each: foam prefilter and estimated 30 lb canister), about once a year, depending on contamination levels Formaldezorb carbon is available for formaldehyde |
Amaircare may change specifications without notice.
Not sure which ES3X setup fits your space? Email us at contactus@usairpurifiers.com and we’ll help you choose, or call (888) 231-1463.
To learn more, download or visit our helpful information:
Amaircare’s product catalogs are on the Product Catalog tab.
Note: Every ES3X ships with standard activated carbon, but you can switch to a specialty carbon for the chemicals in your space. Plain activated carbon doesn’t hold some reactive gases well, such as ammonia and formaldehyde; for those we may recommend an impregnated carbon like Formaldezorb, which may cost extra. Tell us what you need filtered at contactus@usairpurifiers.com, or call (888) 231-1463.
Your ES3X can be configured for the job, and with 3 filter sets inside, it takes its filters in threes. The ES3X for Moderate VOCs uses three 16″ ET Plus Annual VOC Filter Kits a year (each with a pleated filter OR an estimated 7 lb carbon canister) and three 16″ Easy Twist HEPA cartridges, highlighted in yellow below. Every ES3X is the same machine, so the other kits turn it into the light or heavy VOC setup whenever your needs change.
| Kit or Filter | What’s Inside | When to Change |
|---|---|---|
| 16″ ET Plus Annual VOC Filter Kit Your ES3X for Moderate VOCs uses 3 of this kit a year | A washable 1/8″ foam prefilter, one VOC canister and an O-ring gasket. Choose a pleated filter OR an estimated 7 lb carbon canister (est. 1,550 g of carbon) for stronger protection; Formaldezorb carbon is offered too. | Foam prefilter: look it over every 3 months, vacuum or wash it when needed, and put in a new one each year Carbon canister: once a year, or earlier if odors noticeably increase |
| 16″ Easy Twist HEPA Filter Your ES3X uses 3 of this filter | One 16″ Perfect Seal Easy Twist HEPA cartridge with 100 sq ft of pleated media (99.98% at 0.3 microns, 99.96% at 0.1 microns), bought separately from the kits. | Look it over every 2 years; once the outside of the media turns dark, it’s time for a new one, usually about every 2 years in commercial use |
| To change your setup, you can also choose: | ||
| 7 lb Carbon Canister Without Prefilters | A single estimated 7 lb Easy Twist carbon canister (standard carbon or Formaldezorb), no prefilter included, sized to fit inside the 16″ HEPA. Handy when you only need canisters. | Roughly once a year; contamination levels can shorten or stretch that |
| 16″ ET Annual Standard Filter Kit | A 1/8″ foam prefilter you can wash, two 1/2″ carbon blankets made of polyester carrying 200% activated carbon (est. 164 g each) and a fresh O-ring gasket: the light VOC setup, with the focus on particulates. | Foam prefilter: look it over every 3 months, vacuum or wash it when needed, and put in a new one each year Carbon blankets: a new blanket every 6 months, or sooner if odors pick up |
| 16″ VOC Ultra 30 lb Filter Kit | A washable 1/8″ foam prefilter, an estimated 30 lb canister with an estimated 9,475 g of granulated carbon, and an O-ring gasket. It goes where the HEPA would be, for heavy VOCs, chemicals, gases and odors, with standard, coconut, Formaldezorb, Multizorb or Acidzorb (also called Acidezorb) carbon. | Foam prefilter: look it over every 3 months, vacuum or wash it when needed, and put in a new one each year Carbon canister: an estimated 12 months, depending on contamination levels; it’s so large that many clients get longer out of it |
| 16″ Formaldezorb VOC Ultra 30 lb Filter Kit | The same Ultra kit filled with Formaldezorb, a carbon designed specifically to target formaldehyde and other toxic chemicals (for example, fumes from hair smoothing treatments): a foam prefilter, an estimated 30 lb canister with an estimated 9,475 g of carbon, and an O-ring gasket. It replaces the HEPA. | Foam prefilter: usually once a year Carbon canister: when its efficiency drops |
Three of everything: with three filter sets, the ES3X holds three foam prefilters, three HEPA cartridges and three carbon canisters at a time, so order kits and HEPAs in threes. The 7 lb Carbon Canister Without Prefilters lets you replace just the canisters when that’s all you need. All ES3X filters are the Easy Twist (ET) style, made after November 2015.
The Video tab on this page shows the steps.
Join our free Filter Reminder Program for an email when it’s time for new filters. Filter questions? Send a note to contactus@usairpurifiers.com, or call (888) 231-1463.