TECHNICAL SPECIFICATIONS
30-A-1KME-01-lgt-voc
Maximum Recommended Area Size: 15,000 ft2 (provides 1 ACH/hr at 8 ft ceiling)
Filters: * Stage 1: Carbon Prefilter – 12 months
* Stage 2: Tri-HEPA Filter (not used in the HEAVY VOC configuration)
* Stage 3: Carbon Blanket This unit will automatically come with 3 x 7 lb carbon canisters for moderate VOCs; however, you can replace the canisters with carbon blankets down the road to focus just on particulates with light VOC protection.
Optional Stage 3: 21 lb Carbon Canister** (3 - 7 lbs of carbon per a canister). Not used in the HEAVY VOC configuration.
Optional Stage 3: 90 lb Carbon Canister* (3 - 30 lbs of carbon per a canister)
* Denotes Filters used in this configuration.
** Unit comes with activated carbon. However, carbon can be specialized based on your needs such as formaldezorb, acidzorb etc.
The unit uses a quantity of 3 filter sets. Each set contains a prefilter and carbon canister.
Airflow: 2000 CFM
Classification: Installed HEPA 1000% Sealed Air Cleaning Device
Finish: Baked Thermoset Powder Finish
Power Consumption: 7.8 amps
Dimensions: 48"L x 17"W x 28"H
Weight: Est 136 lbs. (with HEPA only Configuration)
Est 157 lbs. (with HEPA/Carbon Configuration)
Est 226 lbs. (with Carbon only Configuration)
Control: Hardwired. Recommended for use with wall mounted air quality sensor or switch
Materials: 18 gauge Steel housing
Outflow: 3 x 11" Rectangular
Fresh Air Intake: 3 x 11" Rectangular
Motor: High Efficiency AC Backward Curved Motor
Voltage: 115 volt*
There are 3 primary configurations for the ES3X:
- Particulate Focus & Light VOCs (Shown): Carbon Prefilter - HEPA - Carbon Blanket. Qty of 3 sets per a unit.
- Particulate Focus & Moderate VOCs: Carbon Prefilter - HEPA - 7 lb Carbon Canister. Qty of 3 sets per a unit.
- Focus on Heavy VOCs, gases, & Odors: Carbon Prefilter - 30 lb Carbon Canister. Qty of 3 sets per a unit. PLEASE NOTE: No HEPA in this configuration.
**Something to keep in mind is that the machines are identical, the filters vary based on filtration needed. With this in mind, if the usage changes with time, you can simply change your filter configuration to match your filtration needs.