Up to 2,000 sq. ft. (185m2) depending on occupant density and other factors. High density commercial not to exceed 500 sq. ft. (46m2).
Assumes 8 foot ceilings.
Solutions should be customized based upon a variety of factors including HVAC
system capabilities and settings, air flows taking into account walls, air pressure, and
doors, ambient air temperatures and humidity, variable density, known VOC
concentrations, other layers of protection, and worst case desired outcomes.
ActivePure® Surface & Air Guardian (Model A1040F) has replaced the Aerus Pure & Clean (Model A1040A) unit
Up to 2,000 sq. ft. (185m2) depending on occupant density and other factors. High density commercial not to exceed 500 sq. ft. (46m2).
Assumes 8 foot ceilings.
Solutions should be customized based upon a variety of factors including HVAC system capabilities and settings, air flows taking into account walls, air pressure, and doors, ambient air temperatures and humidity, variable density, known VOC concentrations, other layers of protection, and worst case desired outcomes.
Benefits
The ActivePure Surface & Air Guardian provides 24/7 proactive air purification and surface decontamination in indoor spaces, while the unit is running.
Proven to reduce over 99.9% of SARS-CoV-2 (the COVID-19 virus) within 1 minute1
Uses ActivePure Technology, proven to reduce up to 99.9%of many common types of bacteria, viruses, and mold in indoor air and surfaces1
Reduces VOC gases, smoke, and odors without the use of ozone1
Multiple carbon brushes aid in the capture of contaminants
Portable, lightweight device
No installation – plug and play
Easy to use and low maintenances
Model A1040F meets California ozone emissions limit. CARB Certified Validated to UL 2998
Specifications
Specifications
Technology Included
ActivePure® Technology: 6” Cells (Qty. 2)
HEPA Filter Screen
Activated Carbon Filter
Carbon Brushes
Environmental Certifications
Model A1040F meets California Ozone Emissions Limit. CARB Certified Validated to UL 2998
Electrical
Input Voltage: 100 ~ 240 VAC; 50/60 Hz
External Power Supply; DC 24 Volts; 1.5 Amps Max
Power Consumption: 43 Watts Max
Mechanical
Nominal Airflow Rate: 40-60 CFM adjustable speed fan
Safety
Model A1040F conforms to UL 867
Weight & Dimensions
7.6 lbs (3.5 kg)
11.75” H x 9.5” W x 10” D (29.8 cm x 24.1 cm x 25.4 cm)
Operating Temperature
34ºF – 100ºF (1ºC – 38ºC)
Sound Level
45 dB(A) (on low); 55 dB(A) (on high)
Recommended Maximum Coverage in a Contiguous Space*
Up to 2,000 sq. ft. (185 m2) depending on occupant density and other factors
High density commercial not to exceed 500 sq. ft. (46 m2)
Hepa Filter 50227, Retail is $105 Bulb and Cell is one component #50086, Retail is $207
For optimal performance Beyond I by Aerus recommends that you replace filter at least every 6 - 12 months, depending on usage.
To maintain optimal performance, the UVC bulb should be replaced every 12 months and the ActivePure cell every two (2) years.
For optimal performance Beyond II by Aerus recommends that you replace filter at least every 6 - 12 months, depending on usage.
To maintain optimal performance, the UVC bulb and ActivePure cell every two (2) years or if the lamp burns out.
Pure and Clean:
AP Cell 2- Needed, Cost $149 each. Totaling to $298 total
Filter - Cost $42
The ActivePure® Cell should be replaced when REPLACE ACTIVEPURE® CELL appears on the display, or twelve (12) months when used continuously or two (2) years if used less than 12 hours a day, whichever comes first. To change the ActivePure® Cell, follow the instructions on page 10.
Free Shipping
Aerus Hydroxyl Blaster Air Purifier with ActivePure Technology
Free Shipping
Aerus Beyond Guardian Air Purifier with ActivePure Technology
Free Shipping
Aerus Car Air Purifier with ActivePure Technology