BEST for Welders & Industrial 3D Printshops. The Airpura 900 / 900 MAX - Heavy Industrial Fume Extractor is made for serious VOC filtration with 40 lbs carbon
The 900 contains 20 Lbs of carbon & the 900 Max contains 40 lbs (20 x 20 lbs) of carbon. (Both Airpura's special Super Gas Activated Carbon.)
Some of the most common chemicals handled by these commercial units are Ammonias, Nitrous dioxide, Nitrous trioxide, Monoethylamine, Toulene, Napthene Chlorine, Chlorine dioxide, Sulfur dioxide, Methylene Chloride, toluene, Hydrogen fluoride, Hydrogen Chloride, Hydrogen Sulfide, Hydrogen Bromide, Mercury vapors, Benzene, formaldehyde, Radioactive Iodine Mold Mycotoxins, Pesticides, styrene.
The Airpura 900 / 900 MAX - Heavy Industrial Fume Extractor is made for serious VOC cleanup. The 900 contains 20 Lbs of carbon & the 900 Max contains 40 lbs (20 x 20 lbs) of carbon. (Both Airpura's special Super Gas Activated Carbon.)
Commonlly handled chemicals:
The Airpura 900 and Airpura 900 Max are commonly used to filter ammonias, Nitrous dioxide, Nitrous trioxide, Monoethylamine, Toulene, Napthene Chlorine, Chlorine dioxide, Sulfur dioxide, Methylene Chloride, toluene, Hydrogen fluoride, Hydrogen Chloride, Hydrogen Sulfide, Hydrogen Bromide, Mercury vapors, Benzene, formaldehyde, Radioactive Iodine Mold Mycotoxins, Pesticides, styrene.
BEST for Welders & Industrial 3D Printshops.
Estimated Maintenance
Prefilters:
Replace every 3-5 months depending on application could be more frequent
Merv Particle Filters
Change every 6-12 months
SuperGas Activated Carbon Filter
Change when necessary based on level of application
Heavy VOC adsorption will cause faster saturation
*Note: All filter maintenance is based on standard usage and average contaminants. Depending on the specific situation, filters may need changed more or less frequently.
Specifications
The Airpura 900 / 900 MAX - Heavy Industrial Fume Extractor is made for serious VOC cleanup. The 900 contains 20 Lbs of carbon & the 900 Max contains 40 lbs (20 x 20 lbs) of carbon. (Both Airpura's special Super Gas Activated Carbon.)
900 MAX
Prefilter
Poly Prefilter
2 Prefilters
Chemical gas & odor filter
2"Carbon Filter
40-lbs (2 x 20lbs.), SuperGas Activated Carbon Filter
The Airpura 900 / 900 Max Industrial Fume extractor has a wide range of uses. If you are looking for versatility and power, this is the unit for you.
Some common uses are as follows:
3D Printing
Welding
Evidence Rooms
Marijuana Dispensaries
Mold
Restoration
Morgues & Funeral Homes
Fume Extractor
Source Extractor
Temp Clean Rooms
Forest Fires
Odor Control
Free Shipping
Electrocorp RAP Series- 204 CC
$2,039.98
Free Shipping
Electrocorp RAP Series- 24 CC
$5,519.98
Free Shipping
Amaircare Airwash MultiPro Air Scrubber Heavy VOC Focus 25 lbs Carbon
$1,328.00